Contact Us

P.O.Box 1481 TAIPEI, TAIWAN

+886-2-2523-6891

+886-2-2523-5419

mail


HYDRAULIC PRESS BRAKE (30-45 TON)


PB-4515
Model PB-3012 PB-3015 PB-3020 PB-4515
Bending Capacity of length (mm) 1270mm 1550mm 2000mm 1550mm
Maximum Pressure (Ton) 30 Ton 30 Ton 30 Ton 45 Ton
Bending Capacity of thickness (mm) 2.5mm 2mm 1.5mm 3mm
Distance Between Housings (mm) 970 1250 1550 1250
Ram Stroke (mm) 150 mm 150 mm 150 mm 150 mm
Table Width (mm) Bottom Die Holder Bottom Die Holder Bottom Die Holder Bottom Die Holder
Distance Between Table / Ram (mm) 250 mm 250 mm 250 mm 250 mm
Oil Tank (Gallon) 20 24 24 28
Main Motor (HP) 3 HP 3 HP 3 HP 5 HP
Approach Speed (mm/sec.) 80 mm/sec. 80 mm/sec. 80 mm/sec. 80 mm/sec.
Bending Speed (mm/sec.) 7 mm/sec. 7 mm/sec. 7 mm/sec. 7 mm/sec.
Return Speed (mm/sec.) 60 mm/sec. 60 mm/sec. 60 mm/sec. 60 mm/sec.
Power Back Gauge (mm) 600 mm 600 mm 600 mm 600 mm
Back Gauge Motor (HP) 1/2 HP 1/2 HP 1/2 HP 1/2 HP
Throat Depth (mm) 200 mm 200 mm 200 mm 200 mm
Gross Weight (kg) 1200 1500 2400 2800
Packing Size (mm) 1400x1200x2050 1700x1200x2050 2300x1200x2050 1900x1300x2200

1. 600mm Manual back gauge micro adjustor.

2. Choose one Top blade A1-A3.

3. Choose one Bottom Die A1-A3.

4. 600 mm Front Support Arm.

5. Control panel with low voltage switches/buttons.

6. Foot switch w/safety projection housing.

7. Tool box w/maintenance tools and leveling pads.

1. Power Bending angle setting device.

2. Power ball screw back gauge w/counter display and frontal control.

3. DELEM 2 Axes NC control System(Depth & Length).

4. CE Conformity.

5. Bottom Die / Table hydraulic crowning auto compensation.

6. T5-T7 Optional Blade.

7. 4 Face Bottom Die B1.

8. Safety sensor protection system.

9. Deeper throat.

10. Special Blade and Bottom Die.

11. Power grease injecting system.

HYDRAULIC PRESS BRAKE (60-80 TON)


PB8026
Model PB-6020 PB-6026 PB-6032 PB-8020 PB-8026 PB-8032
Bending Capacity of length (mm) 2000mm 2600mm 3200mm 2000mm 2600mm 3200mm
Maximum Pressure (Ton) 60 Ton 60 Ton 60 Ton 80 Ton 80 Ton 80 Ton
Bending Capacity of thickness (mm) 4mm 3.2mm 2.5mm 5mm 4mm 3.2mm
Distance Between Housings (mm) 1550 2100 2600 1550 2100 2600
Ram Stroke (mm) 150 mm 150 mm 150 mm 150 mm 150 mm 150 mm
Table Width (mm) 160 mm 160 mm 160 mm 160 mm 160 mm 160 mm
Distance Between Table / Ram (mm) 300 mm 300 mm 300 mm 300 mm 300 mm 300 mm
Oil Tank (Gallon) 35 35 35 45 45 45
Main Motor (HP) 7.5 HP 7.5 HP 7.5 HP 10 HP 10 HP 10 HP
Approach Speed (mm/sec.) 80 mm/sec. 80 mm/sec. 80 mm/sec. 80 mm/sec. 80 mm/sec. 80 mm/sec.
Bending Speed (mm/sec.) 7 mm/sec. 7 mm/sec. 7 mm/sec. 6 mm/sec. 6 mm/sec. 6 mm/sec.
Return Speed (mm/sec.) 60 mm/sec. 60 mm/sec. 60 mm/sec. 60 mm/sec. 60 mm/sec. 60 mm/sec.
Power Back Gauge (mm) 600 mm 600 mm 600 mm 600 mm 600 mm 600 mm
Back Gauge Motor (HP) 1/2 HP 1/2 HP 1/2 HP 1/2 HP 1/2 HP 1/2 HP
Throat Depth (mm) 200 mm 200 mm 200 mm 200 mm 200 mm 200 mm
Gross Weight (kg) 3500 4000 4500 4000 5000 5600
Packing Size (mm) 2300x1550x2400 2900x1550x2430 3500x1550x2450 2400x1600x2400 3000x1600x2430 3600x1600x2450

1. 600mm Power ball screw back gauge w/counter display and frontal control.

2. Choose one Top blade T1-T4.

3. 4 face Bottom Die B1.

4. Power Bending angle setting device.

5. 600 mm Front Support Arm.

6. Bottom Die / Table hydraulic crowning auto compensation.

7. Control panel with low voltage switches/buttons.

8. Foot switch w/safety projection housing.

9. Tool box w/maintenance tools and leveling pads .

1. DELEM 2 Axes NC control System (Depth & Length).

2. CE Conformity.

3. T5-T7 Optional Blade.

4. Safety sensor protection system.

5. Deeper throat.

6. Special Blade and Bottom Die.

7. Power grease injecting system.

HYDRAULIC PRESS BRAKE (110-220 TON)


PB16026
PB16026
Model PB-11026 PB-11032 PB-11040 PB-16026 PB-16032 PB-16040 PB-22026 PB-22032 PB-22040
Bending Capacity of length (mm) 2600mm 3200mm 4000mm 2600mm 3200mm 4000mm 2600mm 3200mm 4000mm
Maximum Pressure (Ton) 110 Ton 110 Ton 110 Ton 160 Ton 160 Ton 160 Ton 220 Ton 220 Ton 220 Ton
Bending Capacity of thickness (mm) 4.5mm 3.5mm 2.5mm 6.5mm 5mm 4.3mm 9mm 8mm 6.5mm
Distance Between Housings (mm) 2100 2600 3400 2100 2550 3350 2100 2500 3300
Ram Stroke (mm) 200 mm 200 mm 200 mm 200 mm 200 mm 200 mm 200 mm 200 mm 200 mm
Table Width (mm) 200 mm 200 mm 200 mm 200 mm 200 mm 200 mm 200 mm 200 mm 200 mm
Distance Between Table / Ram (mm) 350 mm 350 mm 350 mm 400 mm 400 mm 400 mm 400 mm 400 mm 400 mm
Oil Tank (Gallon) 55 55 55 80 80 80 100 100 100
Main Motor (HP) 10 HP 10 HP 10 HP 15 HP 15 HP 15 HP 20 HP 20 HP 20 HP
Approach Speed (mm/sec.) 80 mm/sec. 80 mm/sec. 80 mm/sec. 80 mm/sec. 80 mm/sec. 80 mm/sec. 80 mm/sec. 80 mm/sec. 80 mm/sec.
Bending Speed (mm/sec.) 6 mm/sec. 6 mm/sec. 6 mm/sec. 6 mm/sec. 6 mm/sec. 6 mm/sec. 6 mm/sec. 6 mm/sec. 6 mm/sec.
Return Speed (mm/sec.) 60 mm/sec. 60 mm/sec. 60 mm/sec. 60 mm/sec. 60 mm/sec. 60 mm/sec. 60 mm/sec. 60 mm/sec. 60 mm/sec.
Power Back Gauge (mm) 600 mm 600 mm 600 mm 600 mm 600 mm 600 mm 600 mm 600 mm 600 mm
Back Gauge Motor (HP) 1/2 HP 1/2 HP 1/2 HP 1/2 HP 1/2 HP 1/2 HP 1/2 HP 1/2 HP 1/2 HP
Throat Depth (mm) 250 mm 250 mm 250 mm 250 mm 250 mm 250 mm 250 mm 250 mm 250 mm
Gross Weight (kg) 6200 7000 9000 8000 10000 13000 11000 12000 15000
Packing Size (mm) 3050x1650x2500 3650x1650x2550 4450x1800x2600 3050x1800x2650 3650x1800x2700 4500x1800x2800 3100x1950x2900 3700x2000x2950 4500x1800x3200

1. 600mm Power ball screw back gauge w/counter display and frontal control.

2. Choose one Top blade T1-T4.

3. 4 face Bottom Die B2.

4. Power Bending angle setting device.

5. 600 mm Front Support Arm.

6. Bottom Die / Table hydraulic crowning auto compensation.

7. Control panel with low voltage switches/buttons.

8. Foot switch w/safety projection housing.

9. Tool box w/maintenance tools and leveling pads.

1. DELEM 2 Axes NC control System (Depth & Length).

2. CE Conformity.

3. T5-T7 Optional Blade.

4. Safety sensor protection system.

5. Deeper throat.

6. Special Blade and Bottom Die.

7. Power grease injecting system.

Hydraulic Press Brake


PB-8026 NC


All models build in hydraulic system with rigid construction. 3 function control mode (Inch/ Auto/ Single) and mechanic hold-downs which can handle most of cutting situation.

PB-8026

PB-16026 NC


All models build in hydraulic system with rigid construction.

PB-16026

PB-22040


FINTEK Hydraulic Press Brake, which provide you powerful and high precision machine.
With complete force range from 30 to 220 Tons, FINTEK Press Brake can solve most of your requirement no matter big size or small size work piece.
Customizable Upper Blade and Bottom Die which provide most proper machine solution to you.
NC 2 axes controller system (Opt equipment) with Power Back gauge, the easier way of bending work and operation.
FINTEK Hydraulic Press Brake, always provide excellent quality with reasonable price..

PB-22040