Contact Us

P.O.Box 1481 TAIPEI, TAIWAN

+886-2-2523-6891

+886-2-2523-5419

mail


4-ROLL PLATE BENDING ROLL


4R-0660H
4R-0660H
Model 4R-0560H 4R-0660H 4R-0860H 4R-1060H
Work Length 1550mm 2050mm 2550mm 3050mm
Bending Capacity 10mm 10mm 10mm 10mm
Pre-Bend Capacity 8mm 8mm 8mm 8mm
Bending Capacity 8 8 8 8
Pre-Bend Capacity 6 6 6 6
Central Rolls diameter (mm) 190 220 240 260
Upper Roll diameter (mm) 170 200 210 230
Bottom Roll diameter (mm) 170 200 210 230
Side Roll diameter (mm) 150 180 190 210
Motor 7.5HP 7.5HP 10HP 10HP
Roll Speed (m/min) 3.2 3.2 3 3
Packing Size (mm) 3000x1270x1370 3700x1300x1400 4500x1500x1500 5000x1600x1700
Shipping Weight 3800KG 5100KG 6200KG 7300KG

1. Two Roll Drive

2. Double Pinch Rolls.

3. DRO for Double Pinch rolls positioning.

4. All rolls are made of Top-grade alloy steel hardened up to 53∘±1∘

5. Hydraulic powered pinch and rear roll adjustment.

6. Portable controller around the machine for rolls forward/reverse/pinch adjustment.

7. Hydraulic circuits is protected against overload and fully enclosed to provide low-noise and leak-proof flow system.

8. Cone bending attachment.

9. Hydraulic powered drop end.

1. Infinitely variable roll rotation speed.

2. Roll feeding table.

3. Safety railing of outboard end.

4. Wireless remote control unit (instead of foot switch unit).

5. CE Conformity.

DOUBLE-PINCH PLATE BENDING ROLL


HR-610
HR-0813
HR-1006
Model HR-0506 HR-0606 HR-0805 HR-1004 HR-0805 HR-0608 HR-0806 HR-1005 HR-0510 HR-0610 HR-0808 HR-1006 HR-0613 HR-0810 HR-1008 HR-0616 HR-0813 HR-1010
Mild Steel Capacity 6.5mm 6.5mm 5.0mm 4.5mm 8.0mm 8.0mm 6.5mm 5.0mm 10mm 10mm 8.0mm 6.5mm 10mm 8.0mm 16mm 16mm 13mm 10mm
Work Length (mm) 1550 2050 2550 3050 1550 2050 2550 3050 1550 2050 2550 3050 2550 3050 2050 2050 2550 3050
Roll Diameter (mm) 205 205 205 205 230 230 230 230 255 255 255 255 280 280 280 310 310 310
Motor 3 HP 3 HP 3 HP 3 HP 5 HP 5 HP 5 HP 5 HP 7.5 HP 7.5 HP 7.5 HP 7.5 HP 10 HP 10 HP 10 HP 15 HP 15 HP 15 HP
Roll speed 2.25 m/min 2.25 m/min 2.25 m/min 2.25 m/min 2.20 m/min 2.20 m/min 2.20 m/min 2.20 m/min 2.15 m/min 2.15 m/min 2.15 m/min 2.15 m/min 2.0 m/min 2.0 m/min 2.0 m/min 2.0 m/min 2.0 m/min 2.0 m/min
Shipping Weight 3300KG 3700KG 4300KG 4750KG 4700KG 4400KG 5600KG 6000KG 5000KG 5750KG 6500KG 7000KG 7710KG 9100KG 10200KG 9100KG 10200KG 11300KG
Packing Size (mm) 3600x1100x1560 4000x1100x1600 4600x1100x1620 5100x1100x1650 3900x1400x1740 4400x1400x1750 4900x1400x1750 3850x1400x1750 3850X1400X1750 4350X1400X1740 4900X1400X1750 5400X1400X1750 4600x1500x1940 5000x1500x1940 5400x1500x1940 5000x1600x1940 5200x1600x2050 5500x1600x2050

1. Hydraulic circuits is protected against overload and fully enclosed to provide low-noise and leak-proof flow system.

2. All three rolls rotation are driven independently and hydraulically.

3. Hydraulic pinch attachment for each side roll.

4. Each side/pinch roll is equipped with an easy-reading LED indicator to show its reference position.

5. Portable controller around the machine for rolls forward/reverse/pinch adjustment.

6. All rolls are made of Top-grade alloy steel hardened up to 53∘±1

7. Spherical roller bearing, which are very high quality made & sealed in against dirt & dust, are installed for all rolls..

1. Infinitely variable roll rotation speed.

2. Cone bending attachment.

3. Wireless remote control unit (instead of foot switch unit).

4. Overhead support device.

5. Hydraulically operated side support device.

6. CE Conformity.

INITAL-PINCH PLATE BENDING ROLL


PR-0545H
PR-0630H
Model PR-0425H PR-0520H PR-0440H PR-0535H PR-0625H PR-0465H PR-0545H PR-0640H PR-0830H PR-0480H PR-0570H PR-0650H
Mild Steel Capacity 2.5mm 2.0mm 4.0mm 3.5mm 2.5mm 6.5mm 4.5mm 4.0mm 3.0mm 8.0mm 7.0mm 5.0mm
Work Length (mm) 1300mm 1550mm 1300mm 1550mm 1300mm 1300mm 2050mm 2050mm 2540mm 1300mm 1550mm 2050mm
Roll Diameter (mm) 95mm 95mm 120mm 120mm 120mm 150mm 150mm 150mm 150mm 180mm 180mm 180mm
Hydraulic Powered Pinch adjustment standard standard standard standard standard standard standard standard standard standard standard standard
Motor 1.5 HP 1.5 HP 2 HP 2 HP 2 HP 3 HP 3 HP 3 HP 3 HP 5 HP 5 HP 5 HP
Roll speed 3.6 m/min 3.6 m/min 2.6 m/min 2.6 m/min 2.6 m/min 2.2 m/min 2.2 m/min 2.2 m/min 2.2 m/min 2.37 m/min 2.37 m/min 2.37 m/min
Shipping Weight 650 800 1300 1400 1600 1700 1900 2100 2450 2210 2560 2800
Packing Size (mm) 2150x850x1350 2400x720x1120 2500x1000x1450 2700x1000x1450 3200x1000x1450 2500x1100x1500 2700x1100x1500 3200x1100x1500 3750x1100x1500 2500x1200x1530 2750x1200x1500 3250x1200x1530

1. All three rolls are driven by hydraulic system.

2. Side/Pinch roll cylinders adjustment synchronously.

3. All rolls are made of top-grade alloy steel hardened upto hrc53∘±1

4. Rigid construction for precise & smooth operation, and long life time usage.

5. Top roll can be swiveled out for easy removal of the finished workpieces.

6. Foot switch for forward/reverse, fitted with a protective housing.

7. Machine power auto shut off whenever top roll swivels out from end frame.

8. Emergency stop cable device.

1. Cone bending attachment.

2. Wireless remote control unit (instead of foot switch unit).

3. CE Conformity.

4. Wire Grooves.

MANUAL ANDPOWER SLIP ROLL


R-2420
R-3622E
R-5016
R-5016E
Model R-2420 R-3622 R-5016 R-2420E R-3622E R-5016E
Mild Steel Capacity 1.0 mm (20GA) 0.8 mm (22GA) 1.6 mm (16GA) 1.0 mm (16GA) 0.8 mm (22GA) 1.6 mm (16GA)
Work Length (mm) 610 mm (24") 762 mm (36") 1270 mm (50") 610 mm (24") 762 mm (36") 1270 mm (50")
Roll Diameter (mm) 50 mm (2") 50 mm (2") 75 mm (3") 50 mm (3") 50 mm (2") 75 mm (3")
Wire grooves 3 3 3 3 3 3
Minimum Forming Radius 35 mm (1.4") 35 mm (1.4") 50 mm (2") 35 mm (1.4") 35 mm (1.4") 50 mm (2")
Gear Ratio 01:01 01:01 03:01 none none none
Roll speed none none none 38rpm 38rpm 38rpm
Motor none none none 0.5 HP 0.5 HP 0.5 HP
Net Weight(kgs) 50 75 220 165 200 300
Packing Size(mm) 1000x480x510 1350x480x510 1760x480x630 1030x60x110 1330x60x110 1850x510x1150

1. All rolls are made of polished, turned and ground high grade carbon steel.

2. Rigid construction for long life & precision operation.

3. Front mounted handle to lift upper roll for easy workpiece removal.

4. Rolls were driven by gears.

5. Wire grooves.

1. Floor Stand for Manual Slip Roll.

2. Hardened of 3 Rolls( R-2420/3622 ONLY).

3. CE Conformity (R-5016E only).

4. Brake motor for R-5016E.

5. 1 phase Motor.

6. Cone Attachment (R-5016E only).

Rolling Machine

4R-0660H


4R rolling machine equip four high quality bending rolls HRC up to 55∘.
Two driving rolls (Top and bottom) and two pinch rolls drive by hydraulic system which can make more powerful and wonderful bending rolls.
Standard cone bending attachment, one machine several application.
FINTEK 4R bending rolls, your faster and powerful rolling machine.

4R-0660H

HR-1006


HR Double-Pinch Rolling machine, which is the strongest and most powerful Rolling machine, will be your first choice in heavy materials.
Double pinch hydraulic bending system with max 310 mm diameter rolls, max bending capacity up to 16mm thickness.
Rolls camber design to compensate any distortion of the rolls from pressure which can avoid material convex or concave shape.

HR-1006

PR-0630H


PR initial-pinch plate bending roll, simple bending easy operating.
All three rolls made in top grade alloy steel and be driven by hydraulic system.
Foot switch for forward/reverse, fitted with a protective housing.

PR-0630H

R-5016


Manual and Power slip roll.
Application in small size work piece.
Standard wire grooves..

R-5016